What Is Stanley Cubix Laser Level?
Stanley cubix laser level is a small handheld tool used in construction. It helps in leveling surfaces such as floors, walls, ceilings and furniture.
The device measures the distance between two points. You can use the tool in various ways.
For instance, if you want to install cabinets, you can use the cubix cross line laser level to check whether the wall is straight. If it is, you can then proceed with installing the cabinets.
It has a self-leveling cross line and a precision grade bubble level on top which will ensure that you get a perfectly leveled and aligned job.
They used the Stanley cubix laser level in vertical line or horizontal line for any angle within 100 degree vertical line.
It's extended to a maximum of 16.4 ft (5m) without the need of an external support. It has a measuring range of 90ft (27m).
How to use Stanley Cubic laser level?
Step 1: First, remove any obstructions from around the area where you are going to work on your project.
Step 2: Make sure there isn’t anything like electrical cables or wires beneath the surface.
Step 3: Place an object at one end of the measuring range. For example, place something heavy on the floor. The heavier the better because this way other objects placed nearby won’t affect the reading.
Step 4: Adjust the laser beam so that it hits the target point. This means making sure that the tip of the wand touches the edge of the object.
Step 5: Move the tip towards its opposite side until the Stanley laser light reaches the center angular lines.
Step 6: Once you have reached the middle mark, move the end away from the object and read the value displayed on the LCD screen.
When done, put everything back exactly how they were before starting the measurement process.
Step 7: Repeat steps 1 through 6 for each corner of the room/wall you intend to measure.
Features and Benefits
This product comes with many benefits for both homeowners and professionals. These include but not limited to:
- Easy to set up.
- Self levelling feature.
- Precise measurement accuracy.
- Accuracy of 0.1mm.
Features
Stanley Cubix Laser Level review features a magnetic base, which allows hands-free use, and a large base plate, which offers a stable working platform.
The Stanley Cubix Laser Level comes with 2 powerful precision lasers that provide consistent, accurate readings.
The first laser automatically adjusts to the level of the terrain for ease of use, whether you’re on uneven terrain or on the level.
The second laser is fixed at 90 degrees and has a beam that is visible up to 300 feet.
With the Stanley Cubix Laser Level, you can create the perfect layout every time, so you can build your deck, fence, or shed with confidence.
Why choose this product over others?
There might be other tools available out there that claim similar features, but they do not have all these advantages.
So before buying any product, make sure you know what your needs are. Then compare them against those listed above so that you can decide which one suits your requirements best.
For example, some products may only offer an easy setup, while others may require frequent calibration. So choose carefully.
Other pages if you're reading up on laser levels..
- How to measure the floor using a laser tape measure
- How to use a laser level to hang pictures
- Why are green laser measure tapes more expensive than red ones
- What is the advantage of a green laser over a red one
- What is the main advantage of a laser level
- How to make a laser level
- How to use a 5 point laser level
- How to use a Bosch rotary laser level
- How to use a Stanley Cubix laser level
- How to calibrate a Bosch laser level
- What is a rotating laser level
- How to use a pipe laser level
- How to use a laser level for tiling
- How to use a The CST Berger laser level
- How accurate are laser levels
- What is the difference between red and green laser levels
- How to use a laser level to align fence posts
- How to adjust a laser level
- How to use a laser level
