How Thick Of Wood Can A Scroll Saw Cut? Find Out Here!

Last Updated On November 24, 2021 By Elliot

Can a Scroll Saw Cut Thick Wood? - Our Guide

If you looking to cut some thick lumber with your scroll saw, you might be wondering if these power tools can handle such a heavy-duty task without breaking. 

A scroll saw can typically manage to cut wood up to 2-inches thick, but you have to make you are using the right blade. The ideal thickness of wood is between 1/4-inch and 3/4-inch.

We have composed a short guide below which will explain the types of blade you need for cutting thick wood, how thick of metal material a scroll saw can cut, factors to consider before cutting thick wood as well as some safety tips for when it comes to cutting your wood. 

Which Is The Proper Blade Choice For Cutting Thick Wood?

Before you can start to cut any kind of thick wood you have to make sure that you are using a variety of blades that have a wide design and less TPI (teeth per inch) to handle the kind of wood. This will produce a rough cut in denser woods but will get the job done. 

Using a standard blade to try and cut thicker wood will cause it to snap or overheat, you should also use the largest blade such as a #7 blade for cutting any wood such as cherry which are hard and also thick, stick to plain-end blades for ease of change. 

Double-tooth blades, precision ground blades and spiral blades are the best for cutting the hardest wood and thick pieces of wood. 

We have listed some other blade types you can find on the market and their uses below - 

  • Standard scroll saw blades - These are larger blades with more space in between each teeth.
  • Skip tooth blade - Best for beginners and cutting thicker wood with a space in between each tooth.
  • Double tooth blade - Cuts slow and smooth for accuracy.
  • Reverse skip tooth blades - For cutting thinner wood like plywood these two-way cut blades stop splintering.
  • Precision ground blades - The teeth of these blades are ground to shape giving a sharp and smooth cut to your workpieces, they are not for beginners. 
  • Crown tooth blades - These blades are slow and best for cutting plastic due to their crown-like teeth. 
  • Spiral blades - Spiral blades have teeth in all directions, making them suitable for rough cuts in harder wood.

Can I Cut Thick Metal With My Scroll Saw? 

Scrolls saw with a premium blade can also be used to cut thick metal such as steel, but you have to make sure this is no thick than 1/8-inch. This is because metal is heavier duty than wood and will wear out your blade fast due to the friction created while cutting. 

You should avoid ordinary blades when cutting thick metal and stick to using skip tooth blades or crown tooth blades. 

Factors To Consider Before Cutting Thick Wood 

There are a few important factors to consider before you start cutting which will influence how well of a cut you can make in your thick wood. 

We have listed them below to help you out. 

Speed Of The Scroll Saw 

If you are going to be cutting wood that is thick with your scroll saw then you should make sure that your scroll saw has variable speed, you will likely need to go fairly slow when cutting thicker wood to avoid the blade from overheating and getting too much pressure. 

Never try and force a blade through thick stock at a high speed as a safety precaution, you could also damage the blade!

Type Of Wood 

You need to consider the kind of wood you are planning to cut, for example, thick softwood is much easier to cut than thick hardwood as these are dense woods.

We will go into further detail about the kinds of wood you can cut with your scroll saw below. 

Soft Woods 

  • Cedar. 
  • Plywood. 
  • Poplar. 

Hard Woods 

  • Red oak. 
  • Walnut. 
  • Cherry. 
  • Hickory.

Polywood

Polywood can also be cut with your scroll saw and is very much like wood but made out of recycled plastics, it is best to use a blade such as crown tooth blades for this material as they cut much slower. 

The Pattern 

The pattern you are planning to make in thick wood is very important, since the wood is thicker than usual it will be harder to navigate tight corners with your flat blades. You will also be using a larger blade than standard blades so the bigger size will be harder to control for accuracy. 

In a thick wood, we would suggest sticking with basic patterns only. 

Condition Of Blade

Even if you choose the right blade for cutting your thick wood, you need to make sure it is sharp, dull blades will snap easily in thick wood or give a very rough cut. Have some replacements for your blade on hand as the thicker the wood is, the more it will wear down your blade.

Essential Tips For Cutting Thick Wood With a Scroll Saw

Cutting thick wood with a scroll saw is not the easiest of tasks and needs time as well as patience for the best result. 

We've bullet-pointed some of our useful tips for cutting thick wood with a scroll saw below. 

  • Use a diamond plate scroll saw - Diamond plate scrolls saws allow you to adjust some specs such as cutting depth and friction while sawing which makes them perfect for handling thicker woods, although they are more expensive. 
  • Measure the thickness of the stack - If you are cutting a thick stack of wood then make sure to measure the thickness of the whole stack rather than piece by piece. 
  • Wear safety equipment - Make sure your eyes are protected by wearing goggles when cutting wood. 
  • Do not force the blade - If your blade gets stuck never try and force it through a thick wood, this could cause it to snap.
  • Stick to smaller blades for smaller wood - Smaller woods of around (3mm)-thick wood need smaller blades with a size of #3 and even smaller. 
  • Oil the blades - Lubricating your blades will help them to cut better and faster through a thick wood, it will also increase their lifespan.
  • Use the right blade tension - Using your blade with the right tension is very important, too tight can cause snapping and too loose will stop the blade from cutting.

Final Words

Overall, the average scroll saw can cut wood up to around 2-inches thick as long as you have the right kind of blade and operate at a slow speed to prevent overworking the scroll saw. Always make sure your blade's teeth are sharp and wear safety equipment when cutting through thicker wood.

Elliot

I'm Elliot Higgins the Founder of multiple hardware stores around the UK. I love wood and wood working. Watching a fine piece of pine or cedar turn into a work of art is extremely satisfying. The one thing I love more than woodworking is the toys that we use! On HandyToolsHome.com; we bring you information and reviews on all kinds of tools.

Post Information

Guide Views 2287 Views
Last Updated On November 24, 2021

Author Information

Elliot

Related Posts

November 23, 2021

What To Look For When Buying A Scroll Saw - Save Your Money For The Best!

Our Ultimate Scroll Saw Buying Guide For people who are buying a scroll saw for the first time, understanding what […]
No Comments
November 23, 2021

Can A Scroll Saw Cut Acrylic? Find Out Here!

Our Guide To Cutting Acrylic With a Scroll Saw Scrolls saws operate with a powerful fine blade for cutting materials, […]
No Comments
November 23, 2021

How To Fix Scroll Saw Vibration? Find Out Here!

Why Is My Scroll Saw Vibrating Too Much? - Our Solutions! One of the main drawbacks to a scroll saw […]
No Comments
November 23, 2021

What Scroll Saw Blade To Use? How List On Blades & Their Uses

Our Guide To Choosing The Right Scroll Saw Blade Even if you buy the best scroll saw on the market, […]
No Comments
November 23, 2021

What Metals Can A Scroll Saw Cut? Aluminium? Bronze? Copper?

Can I Cut Aluminium With a Scroll Saw? - Our Guide To Scroll Saw Metal Cutting Scroll saws are primarily […]
No Comments
November 23, 2021

What Is A Scroll Saw Used For? Our List Of The Top Uses!

Our Ultimate Guide To What You Can Use A Scroll Saw For Scroll saws are popular tools for many DIY […]
No Comments
November 14, 2021

How To Cut A 60 Degree Angle On A Table Saw? Learn Here!

Setting up a Table Saw for Cutting Table saws are one of the most versatile tool in the shop. They […]
No Comments
October 11, 2021

What Are Reciprocating Saws Used For?

What Is A Reciprocating Saw Good For Cutting? Reciprocating saws are used for demolition work. When a hammer or a […]
No Comments
September 20, 2021

How To Cut A 45 Degree Angle With A Circular Saw - Our Step By Step Method

For the best results in cutting a 45-degree angle with a circular saw, we recommend that you follow this guide […]
No Comments
August 28, 2021

How Many Watts Does A Circular Saw Use? Find Out Here..

Do Circular Saws Consume A Lot Of Power? When choosing your best types of power tools, checking the electrical consumption […]
No Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

HandyToolsHome.com

HandyToolsHome.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.co.uk & Amazon.com.
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram